Disk Will Not Initialize- Data Error (cyclic redundancy check)

Seagate Pipeline HD (1TB) Hard Drive (5900rpm) 6Gb/s SATA 64MB  Video Drive on Humax YouView PVR.

Humax Youview on Start Up reported.   Please Wait.....(forever)
Factory Reset procedure all 5 options did not respond. Disk Removed.
Fitted into an external USB3 Docking Bay
Windows Control Panel Disk Management reported as Disk needs to be initialized
then Data Error (cyclic redundancy check).

The only software that would access the drive and give a diagnosis was Mini Tools Partition Wizard.
This reported it as a bad disk and partition recovery did not recover it.

Deleted Files still show in Windows 7 Explorer...a Fix

If you delete a file with the delete key on the keyboard and they still show in the folder in Windows Explorer. When you press delete again it says file not found.
Try arranging the file names alphabetically.
This works sometimes

or

One of the most successful solutions to this problems (although it doesn't help all the time) is to turn on the Windows desktop refresh feature. To do this, go to the Registry
"HKEY_CLASSES_ROOT\CLSID\{BDEADE7F-C265-11D0-BCED-00A0C90AB50F}\Instance", look out for a DWORD value called "DontRefresh" which is set to "1" (on). Change the value to "0" (off). This re-enables the refresh. Note that the CLSID given above may depend on your machine. The easiest solution if you can't find the key is to just go to "HKEY_CLASSES_ROOT\CLSID", hit "F3" and do a search for "DontRefresh

Network Adaptor (Ehernet Connector on PC) check speed

To check speed of Network Adaptor

RUN
CMD
Type  wmic NIC where NetEnabled=true get Name, Speed

Returns as below  which is a Gigabit Connector (1000000000)

Microsoft Windows [Version 10.0.10586]
(c) 2015 Microsoft Corporation. All rights reserved.
C:\Users\xxxx>wmic NIC where NetEnabled=true get Name, Speed
Name                                         Speed
Intel(R) 82566DC Gigabit Network Connection  1000000000

C:\Users\xxxxl>

Test Memory Modules (RAM Chips) in Windows

Windows has a built in Memory Diagnostics  Tool
Type RUN
Type mdsched

Computer will reboot and run in DOS two passes and then reboot into Windows and produce a report.

Also a Free utility memtest 86 does a more comprehensive test but needs a bootable CD creating.

NAS Drives not showing in Explorer in Windows 10

For some reason the NAS Drives on my Network are not showing in Windows 10 Version 1511.
It is possible to enable them by going to Explorer-This PC-and entering \\nameofNAS.

 

 

 

Unfortunately on closing Explorer and reopening they disappear again.
Waiting for a Fix  26/11/2015

Windows 10 desktop.ini icons showing on desktop.

These are not malware and are showing because you have set Windows 10 to show "hidden & system" files.
Do not delete them as they will be just created again.
If you don't want to see them then uncheck the box in  "hidden items "in  Windows Explorer.

Humax Remote Control set individually to avoid conflict

Multi Code function HD/HDR remote
If you are using more than one receiver in the same location you can change the remote control frequency so that the remote control commands do not conflict.
(This is only relevant to the Foxsat HD, HDR, HDCI 5000, HDR 1000/1010/1100S, HB1000S, FVP-4000T, HD/HDR Fox T2 freeview HD products, incl the HDR 1800/2000T)
1. Switch on your TV set and the Humax product that you wish to change the remote code.
2. Make sure that the other Humax product that you do not wish to control is in Standby or powered OFF at the mains.
3. Point the remote control towards the remote control sensor of the target receiver.
4. Press and hold the 0 and OK buttons simultaneously for 5 seconds until the PVR button on the remote stays red.
5. A message will appear on the TV screen:
"You can change the remote control mode.
Press a Numeric Key (<1> ~ <6>) to select the mode
Current mode: Mode 1."
6. Press a NUMERIC button (from 1 to 6) to select a different mode.
7. A message confirming the change of Mode will appear on screen.