Thursday, 26 November 2015

NAS Drives not showing in Explorer in Windows 10

For some reason the NAS Drives on my Network are not showing in Windows 10 Version 1511.
It is possible to enable them by going to Explorer-This PC-and entering \\nameofNAS.



Unfortunately on closing Explorer and reopening they disappear again.
Waiting for a Fix  26/11/2015

Thursday, 12 November 2015

Windows 10 desktop.ini icons showing on desktop.

These are not malware and are showing because you have set Windows 10 to show "hidden & system" files.
Do not delete them as they will be just created again.
If you don't want to see them then uncheck the box in  "hidden items "in  Windows Explorer.

Wednesday, 11 November 2015

Humax Remote Control set individually to avoid conflict

Multi Code function HD/HDR remote
If you are using more than one receiver in the same location you can change the remote control frequency so that the remote control commands do not conflict.
(This is only relevant to the Foxsat HD, HDR, HDCI 5000, HDR 1000/1010/1100S, HB1000S, FVP-4000T, HD/HDR Fox T2 freeview HD products, incl the HDR 1800/2000T)
1. Switch on your TV set and the Humax product that you wish to change the remote code.
2. Make sure that the other Humax product that you do not wish to control is in Standby or powered OFF at the mains.
3. Point the remote control towards the remote control sensor of the target receiver.
4. Press and hold the 0 and OK buttons simultaneously for 5 seconds until the PVR button on the remote stays red.
5. A message will appear on the TV screen:
"You can change the remote control mode.
Press a Numeric Key (<1> ~ <6>) to select the mode
Current mode: Mode 1."
6. Press a NUMERIC button (from 1 to 6) to select a different mode.
7. A message confirming the change of Mode will appear on screen.